Acrylabs - Renewable Roof Systems and Wall Coating Products

2100B Acrylic Base Coat

 

Note: You may also view these documents in Adobe Acrobat Reader(.pdf format).

Click Here to view this document in .pdf Format

 

Product Data:

 

2100B is a water born 100% acrylic coating for the construction market. Utilizing advanced technology the 2100B is formulated for maximum adhesion to asphalt, metal, modified bitumen, concrete, wood, EPDM, and most single ply membrane systems.


2100B cures to a strong durable finish that is easily maintained.
2100B is the tack or base coat (adhesive) for most ACRYLAB ROOF SYSTEMS.

 

2100B is available in Gray only.


Application: can be brushed, rolled or sprayed. Final thickness of 2100B will vary depending on surface conditions (porosity, etc.). A uniform dry film thickness of 12 mils (DFT) is suggested to maintain a pinhole free membrane. Allow two to four hours between coats.
 

 

2100B is available in 1, 5, and 55 gallon plastic containers.

 

For more detailed instructions refer to our Installation Guide or consult ACRYLABS, INC. technical department.

 

2100B TECHNICAL DATA

 

            TYPICAL PROPERTIES

            WEIGHT PER GALLON                                12.1 LBS                    ASTM D1475-90                               
            % SOLIDS BY WEIGHT                                66.9                             ASTM D2369-97                                
            % SOLIDS BY VOLUME                                50.8                            ASTM D2697-86                                

            PIGMENT VOLUME                                       43.0%                                                             
            VISCOSITY                                                      110-115 Ku               ASTM D562-01 
            V.O.C.                                                               <100 g/l                      ASTM D3960-01 
            PH                                                                     8.6 - 9.2                      ASTM E70-97
            FLASH POINT                                                 N/A                                                                        

 

 

            TYPICAL PROPERTIES (20 mil DFT)

            LOW TEMPERATURE FLEXABILITY             Passes 1/8” mandrel bend

            ELONGATION AT MAX STRESS                                    240% @ 74F                   ASTM C-734

                                                                                                           80% @ 0F

            ELONGATION AT BREAK                                                245% @ 74F                  ASTM D-412

                                                                                                           130% @ 0F

            TENSILE STRENGHT AT MAX STRESS                       175psi @ 74F                ASTM D-412

                                                                                                           725psi @ 0F

            TENSILE STRENGHT AT BREAK                                  165psi @ 74F                 ASTM D-412

                                                                                                           660psi @ 0F

            RECOVERY AFTER 25% ELONGATION                         65%                               ASTM D-412

            PERMEABILITY (20MILS)                                                 <20 PERMS                    ASTM E96-80

            ACCELERATED WEATHERING                                  NO EFFECT 2 YEARS      ASTM G-53
                                                                                                        WEATHEROMETER
 
 

 

 

 

roofing systems msds

"We cover the future . . . and the past."

 

Renewable - Sustainable - Seamless - Environmentally Responsible
Exceptional Durability - Flexible - UV Resistant - ASTM Tested
Reduces Energy Costs - Outstanding Performance - Unmatched Service