Acrylabs - Renewable Roof Systems and Wall Coating Products

2100HT Acrylic Finish Coat

 

Note: You may also view these documents in Adobe Acrobat Reader(.pdf format).

Click Here to view this document in .pdf Format

 

Product Data:

 

2100HT is a water born 100% acrylic coating for the construction market.
Utilizing advanced technology the 2100HT is formulated for maximum tensile
strength and elongation. Adheres to asphalt, metal, modified bitumen,
concrete, wood, EPDM, PUF, and most single ply membrane systems.
The 2100HT is also utilized in high traffic areas.

 

2100HT cures to a strong durable finish that is easily maintained.
2100HT is the finish coat for ACRYLAB Roof and Deck Systems.

 

2100HT is available in 13 standard colors. Custom matches can be done,
however minimum order quantities apply; consult ACRYLABS for more information.

 

Application: can be brushed, rolled or sprayed. Final thickness
of 2100 will vary depending on surface conditions (porosity, etc.).
A uniform dry film thickness of 12 mils (DFT) is suggested to maintain a
pinhole free membrane. Allow two to four hours between coats.

 

2100 is available in 1, 5, and 55 gallon plastic containers.

 

For more detailed instructions refer to our Installation Guide or consult ACRYLABS, INC. technical department.

 

2100HT TECHNICAL DATA

 

            TYPICAL PROPERTIES

            WEIGHT PER GALLON                                11.1 LBS                     ASTM D1475-90                               
            % SOLIDS BY WEIGHT                                64.9                              ASTM D2369-97                                
            % SOLIDS BY VOLUME                                51                                 ASTM D2697                                

            PIGMENT VOLUME                                       43.0%                                                             
            VISCOSITY                                                      95-110 Ku                   ASTM D562-01 
            V.O.C.                                                               <100 g/l                       ASTM D3960-01 
            PH                                                                     9.0 - 9.6                       ASTM E70-97
            FLASH POINT                                                 N/A                                                                        

            Solids by weight and volume can vary by 2%

 

            TYPICAL PROPERTIES (20 mil DFT)

            FUNGUS GROWTH                                                         NONE

            ACCELERATED WEATHERING                      NO EFFECT 2 YEARS         ASTM G-53

           WEATHEROMETER LOW TEMPERATURE FLEXABILITY     Passes 1/8” mandrel bend

                                                                                                        @ -30 Degrees                 ASTM C-734 

           ELONGATION AT BREAK                                                460% @ 74F                     ASTM D-412

                                                                                                           100% @ 0F

           TENSILE STRENGHT AT BREAK                                  670 % @ 74F                    ASTM D-412

                                                                                                           2100% @ 0F

           PERMEABILITY (20MILS)                                                 <20 PERMS                      ASTM E96-80

           
          GLOSS (60 DEGREE METER)                                         15                                        ASTM D-523

          OZONE DEGRADATION                                                 NO EFFECT                         ASTM D-1149


 

 

 

 

roofing systems msds

"We cover the future . . . and the past."

 

Renewable - Sustainable - Seamless - Environmentally Responsible
Exceptional Durability - Flexible - UV Resistant - ASTM Tested
Reduces Energy Costs - Outstanding Performance - Unmatched Service