Acrylabs - Renewable Roof Systems and Wall Coating Products

2100 Acrylic Finish Coat

 

Note: You may also view these documents in Adobe Acrobat Reader(.pdf format).

Click Here to view this document in .pdf Format

 

Product Data:

 

2100 is a water born 100%
acrylic coating for the construction market. Utilizing advanced technology the 2100
is formulated for maximum adhesion to asphalt, metal, modified bitumen, concrete,
wood, EPDM, PUF, and most single ply membrane systems.


2100 cures to a strong durable finish that is easily maintained.
2100 is the finish coat for most ACRYLAB ROOF SYSTEMS.

 

2100 is available in 13 standard colors. Custom matches can be done, however minimum order quantities apply; consult ACRYLABS for more information.

 

Application: can be brushed, rolled or sprayed. Final thickness of 2100 will vary depending on surface conditions (porosity, etc.). A uniform dry film thickness of 12 mils (DFT) is suggested to maintain a pinhole free membrane. Allow two to four hours between coats.

 

2100 is available in 1, 5, and 55 gallon plastic containers.

 

For more detailed instructions refer to our Installation Guide or consult ACRYLABS, INC. technical department.

 

2100 TECHNICAL DATA

 

            TYPICAL PROPERTIES

            WEIGHT PER GALLON                                12.2 LBS                    ASTM D1475-90                               
            % SOLIDS BY WEIGHT                                68.0                             ASTM D2369-97                                
            % SOLIDS BY VOLUME                               55.2                            ASTM D2697-86                                

            PIGMENT VOLUME                                       43.0%                                                             
            VISCOSITY                                                      110-120 Ku                ASTM D562-01 
            V.O.C.                                                               <100 g/l                         ASTM D3960-01 
            PH                                                                     8.6 - 9.2                         ASTM E70-97
            FLASH POINT                                                 N/A                                                                        

 

 

            TYPICAL PROPERTIES (20 mil DFT)

            LOW TEMPERATURE FLEXABILITY             Passes 1/8” mandrel bend

            ELONGATION AT MAX STRESS                                   240% @ 74F                ASTM C-734

                                                                                                        80% @ 0F

            ELONGATION AT BREAK                                              300% @ 74F                 ASTM D-412

                                                                                                        130% @ 0F

            TENSILE STRENGHT AT MAX STRESS                      250psi @ 74F               ASTM D-412

                                                                                                         760psi @ 0F

            TENSILE STRENGHT AT BREAK                                  235psi @ 74F               ASTM D-412

                                                                                                          690psi @ 0F

            RECOVERY AFTER 25% ELONGATION                         65%                             ASTM D-412

            PERMEABILITY (20MILS)                                                 <10 PERMS                  ASTM E96-80

            ACCELERATED WEATHERING                                  NO EFFECT 2 YEARS    ASTM G-53
                                                                                                        WEATHEROMETER
 

 

 

 

roofing systems msds

"We cover the future . . . and the past."

 

Renewable - Sustainable - Seamless - Environmentally Responsible
Exceptional Durability - Flexible - UV Resistant - ASTM Tested
Reduces Energy Costs - Outstanding Performance - Unmatched Service