Acrylabs - Renewable Roof Systems and Wall Coating Products

2101 Acrylic Finish Coat

 

Note: You may also view these documents in Adobe Acrobat Reader(.pdf format).

Click Here to view this document in .pdf Format

 

Product Data:

 

2101 is a waterborne, 100% acrylic coating for the construction market.
Utilizing advanced polymer technology, the 2101 is formulated to
resist continuous ponding. 2101 is designed for new and existing asphalt,
modified bitumen, EPDM, and most single ply membrane systems.
2101 cures to a strong durable finish that is easily maintained.

 

2101 is available in 13 standard colors. Custom matches can be done, however minimum order quantities apply. Consult ACRYLABS for more information.

 

 

Application: can be brushed, rolled or sprayed. Final thickness of
2101 will vary depending on surface conditions (porosity, etc.). A uniform dry
film thickness of 20 mils (DFT) is suggested to maintain a pinhole free membrane.
Allow two to four hours between coats

 

2101 is available in 5, and 55 gallon plastic containers.

 

For more detailed instructions refer to our Installation Guide or consult ACRYLABS, INC. technical department.

 

2101 TECHNICAL DATA

 

            TYPICAL PROPERTIES

            WEIGHT PER GALLON                                11.4 LBS                     ASTM D1475-90                               
            % SOLIDS BY WEIGHT                                64.3                              ASTM D2369-97                                
            % SOLIDS BY VOLUME                                50.1                             ASTM D2697-86                                

            PIGMENT VOLUME                                       38.8%                                                             
            VISCOSITY                                                      100-115 Ku                ASTM D562-01 
            V.O.C.                                                               <100 g/l                       ASTM D3960-01 
            PH                                                                     9.0 - 9.9                       ASTM E70-97
            FLASH POINT                                                 N/A                                                                        

           

 

            TYPICAL PROPERTIES (20 mil DFT)

            LOW TEMPERATURE FLEXABILITY     Passes 1/8” mandrel bend

                                                                                                        @ -30 Degrees                 ASTM C-734 

           ELONGATION AT BREAK                                                980% @ 74F                     ASTM D-412

                                                                                                         130% @ 32F

           TENSILE STRENGHT AT MAX STRES                          100psi @ 75F                  ASTM D-412

                                                                                                          720psi% @ 32F

           PERMEABILITY (20MILS)                                                 <5 PERMS                         ASTM E96-80

           ACCELERATED WEATHERING                                 NO EFFECT 2 YEARS         ASTM G-53

 


 

 

 

 

roofing systems msds

"We cover the future . . . and the past."

 

Renewable - Sustainable - Seamless - Environmentally Responsible
Exceptional Durability - Flexible - UV Resistant - ASTM Tested
Reduces Energy Costs - Outstanding Performance - Unmatched Service