• Home
• Roofing Products
• Wall Coatings Products
• How it works
• Roofing Approvals
• Architectural Specs
• Application Specs
• Warranty
• MSDS
• FAQ's
• Contact Us
• News & Updates

Acrylabs 3600 Series Coatings (Rust Converter)

 

Note: You may also view these documents in Adobe Acrobat Reader(.pdf format).

Click Here to view this document in .pdf Format

 

 MATERIAL SAFETY DATA SHEET

---

SECTION I: PRODUCT IDENTIFICATION

---

Product Name:                Acrylabs 3600 Series Coatings (Rust Converter)
Chemical Name:             Acrylic Coating Solution
Date of Revision:            5/11/2005

 

SECTION II: COMPANY IDENTIFICATION

---

Address:        Acrylabs, Inc.
                        730 Commercial Lane
                        Honey Brook, PA 19344
 

Emergency Phone Number:          (610) 273-1355
Informational Phone Number:        866-273-1355
 

 

SECTION III: HAZARDOUS INGREDIENTS/IDENTITY INFORMATION

---

Hazardous Components - (Specific Chemical Identity, Common Name(s))

OSHA PEL

ACTIH TLY

Other Limits %

None - TRI Reporting (SARA Title III) -none 40 CFR 372 -none OSHA 29 CFR 1910 -none

                     EPA - CEPPO -none EPRCA -none RCRA -none RMP -none

SECTION IV: HEALTH HAZARD DATA

---

 

Routes of Entry - Signs and Symptoms of Exposure	Emergency and First Aid Procedures
INHALATION: Yes,a mist.	Remove victim to fresh air; if symptoms persist, seek medical attention.
SKIN: Yes.	Remove contaminated clothing; wash affected area with soap and water; launder contaminated clothing before reuse; if irritation, seek medical attention.
EYES: Yes.Contact with eyes may cause irritation and redness.	Flush eyes with water for 30 minutes; if irritation persists, seek medical attention.
INGESTION: Yes. May cause headache, nausea, and abdominal pains.	Seek medical attention. Vomiting may be induced if there is no danger of aspiration.

Health Hazards (Acute and Chronic): Acute skin contact may cause irritation. Prolonged contact may cause burns. Chronic exposure may cause dermatitis. Chronic eye exposure may cause conjunctivitis.

Carcinogenicity: NTP? No     IARC Monographs? No       OSHA Regulated? No

Medical Conditions : Dermatitis.

 

SECTION V: FIRE AND EXPLOSION DATA

---

Flash Point: >200° F
Means of Extinguishing: Not flammable; dry latex: use water fog.   

Flammable Limits: N/A

Special Fire Fighting Procedures: None

Unusual Fire and Explosion Hazards: : None; Not flammable.

 

SECTION VI: ACCIDENTAL RELEASE MEASURES

---

Steps to be Taken in Handling and Storage:

                    Small spills - wash to sanitary sewer with plenty of water.

                    Large spills - soak up with approved absorbent, shovel product into approved container for

                    disposal. Wash area with plenty of water.

 

SECTION VII: EXPOSURE CONTROLS/ PERSONAL PROTECTION

---

Respiratory Protection (Specify Type): Not required for most conditions. Use mist respirator in enclosed areas.

Ventilation: Local exhaust: not required; Mechanical (General): Not required

Protective Gloves: Use rubber gloves.

Eye Protection: Use chemical splash goggles.

Other Protective Clothing and Equipment: Wear body-covering clothing.

Work/Hygienic Practices: Wash hands/exposed skin after use. Remove contaminated or wetted clothing.

 

SECTION VIII: PHYSICAL/CHEMICAL PROPERTIES

---

Boiling Point:                                                     212° F

Vapor Pressure (MM HG):                              N/A
Vapor Density:                                                   N/A

Solubility in Water:                                           100% Dispersible

Appearance and Odor:                                    Thin, milky white/beige liquid with mild odor

Specific Gravity:                                                1.02 (water = 1)  

Melting Point:                                                      N/A

Evaporation Rate:                                               N/A  

Volatile Organic Compounds (VOC's):        60 g/L
 

SECTION IX: STABILITY AND REACTIVITY

---

Stability: Stable

Conditions to Avoid: Store between 3° C (38° F) and 41° C (105° F). Avoid direct sunlight. Shelf life 2 years. Keep from freezing. Store in closed containers. Keep unused product in original container to avoid converting unused material.

Incompatibility (Materials to avoid): Alkalis, ammonia, iron compounds, oxidizing agents, chromates (pickling agents), some latex (tannin staining). See Technical Data.

Hazardous Decomposition or By-Products: Carbon monoxide, organic acids and aldehydes.

Hazardous Polymerization: Will not occur.

 

SECTION X: DISPOSAL CONSIDERATIONS

---

Waste Disposal Method: This primer may be allowed to dry and disposed of as a non-hazardous, solid waste.

 

SECTION XI: TRANSPORT INFORMATION

---

US DOT Class: 55 - No shipping restrictions. May be shipped normally as a non-hazardous material.

UN Harmonized Code: 3810.10.0000

Tariff Code: 149980.2

 

Prepared by Acrylabs, Inc.- Technical Department 5/11/05

 

The information contained herein relates only to the specific material identified and is believed to be accurate and reliable by all those associated with Acrylabs, Inc. No representations, guarantee or warranty, expressed or implied, is made as to the accuracy, reliability, or completeness of the information provided. Users assume all risks associated with the use of the material and are advised to confirm in advance that the information contained in this MSDS is correct, applicable, and suitable to their circumstances. In accordance with the OSHA Federal Hazard Communication Standard, the actual percentages of ingredients have been omitted.