Application Guidelines
AcryLabs Liquid Applied Roof Membrane Systems
AcryLabs System 50 is a high-performance liquid-applied roof system that uses AcryLabs Base Coat, AcryLabs Fabric Reinforcement, and AcryLabs Finish Coat for superior weatherability and long-term performance. to create a seamless membrane with a minimum thickness of 45 - 50 mils. System 50 is fully adhered, self-flashing, UV-resistant, flexible, waterborne, and renewable, in most cases requiring only a single maintenance coat. Our waterborne coatings meet or exceed all V.O.C. regulatory guidance.
AcryLabs System 20 - Metal is a high-performance, partially reinforced roof system for metal roofs. System 20 - Metal yields a final membrane thickness of 20 mils throughout the field and 45 - 50 mils at reinforced areas. This system combines AcryLabs Base Coat, AcryLabs Fabric Reinforcement, and AcryLabs Finish Coat for superior weatherability and long-term performance. System 20 - Metal is fully adhered, self-flashing, UV-resistant, flexible, waterborne, and renewable, in most cases, with a single maintenance coat. Our waterborne coatings meet or exceed all V.O.C. regulatory requirements.
AcryLabs DEK-coat is a 100% acrylic, water-based elastomeric coating. It can be applied to the walking surfaces of decks and balconies with the fully reinforced AcryLabs Base System or as a stand-alone coating. Using advanced polymer technology, DEK-coat is formulated to perform well under foot traffic and in light commercial areas while providing a seamless, waterproof membrane. DEK-coat is formulated for maximum adhesion to most existing surfaces, including asphalt, metal, modified bitumen, EPDM, concrete, brick, block, stone, stucco, wood, and most single-ply membrane systems, as well as new board, including plywood, OSB, EPS, fiberglass, and all cement boards. DEK-coat cures to a strong, durable finish that is easy to maintain.
AcryLabs Acrycrete is designed for refinishing and water-proofing all types of surfaces, including decks, walkways, drivable surfaces, parking lots, foundation walls, interior & exterior basement walls, moisture-retaining structures such as pools, cisterns, and concrete shrubbery boxes. Reinforcing it with the AcryLabs Fabric Reinforcement will create a hard-wearing, waterproof membrane that is also resistant to standing water and ideal for subterranean waterproofing.
AcryLabs Liquid Walk Pad is a textured coating designed to offer a non-slip surface over the AcryLabs Roof Membranes or E.P.D.M. (rubber), as well as most traditional roofing materials and cementitious surfaces. It creates a fully adhered, breathable membrane with non-slip properties, ensuring safety for walking and traffic management on roofs. The Liquid Walk Pad yields a membrane thickness of 10-20 mils, varying with desired non-skid coarseness.
The Acrypel Sealer is a penetrating, water-based silane/siloxane sealer for masonry surfaces, preserving the natural look and texture while providing superior weatherability.
AcryLabs Asphalt Emulsion is applied by brush, spray, or trowel/squeegee in one or multiple coats to level and fill exterior horizontal surfaces. Also works well as a pond filler under the AcryLabs Liquid Applied Roof Membrane System.
AcryLabs is dedicated to providing sustainable, highly efficient roofing solutions tailored to your project-specific requirements, ensuring your building envelope and roofing systems are built to last.
Proudly Made in the U.S.A.